LSIS LSLV0055H100-4COFN, Руководство пользователя

Страница: 200 / 610

Learning Advanced Features
186
Code Description
EPI-13EPID1 Out
LPF
Used when the output of the EPID controller changes too fast or the
entire system is unstable, due to severe oscillation. In general, a lower
value (default value=0) is used to speed up response time, but in
some cases a higher value increases stability. The higher the value,
the more stable the EPID controller output is, but the slower the
response time.
EPI-14 EPID1 Limit
Hi,
EPI-15 EPID1 Limit
Lo
Limits the output of the controller.
EPI-16
EPID1 Out Inv
If EPID Out Inv is set to ‗Yes,‘ the difference (error) value between the
reference and the feedback is set as the feedback–reference value.
EPI-17 EPID1 Unit
Sel
Sets the unit for the control variable.
0: CUST is a custom unit defined by the user.
Setting
0 CUST 21 m 3/m(m 3/min)
1 % 22 m 3/h(m 3/h)
2 PSI 23 l/s
3 ˚F 24 l/m
4 ˚C 25 l/h
5 inWC 26 kg/s
6 inM 27 kg/m
7 Bar 28 kg/h
8 mBar 29 gl/s
9 Pa 30 gl/m
10 kPa 31 gl/h
11 Hz 32 ft/s
12 Rpm 33 f3/s(ft3/min)
13 V 34 f3/h (ft3/h)
14 I 35 lb/s
15 kW 36 lb/m
16 HP 37 lb/m
17 mpm 38 lb/h
18 ft 39 ppm
19 m/s 40 pps
20 m3/s(m 3/S)
EPI-18 EPID1 Unit
Scl
Adjusts the scale to fit the unit selected at EPI-17 EPI1 Unit Sel.
EPI-19 EPID1 Unit
0 %
EPI-20 EPID1 Unit
Sets the EPID1 Unit 0% value and the EPID1 Unit 100% value as the
minimum and maximum values set at EPI1-17.