LSIS LSLV0055H100-4COFN, Руководство пользователя

Страница: 163 / 610

149
Learning Advanced Features
5.2 Jog Operation
The jog operation allows for a temporary control of the inverter. You can enter a jog
operation command using the multi-function terminals or by using the [ESC] key on the
keypad.
The jog operation is the second highest priority operation, after the dwell operation. If a jog
operation is requested while operating the multi-step, up-down, or 3-wire operation modes,
the jog operation overrides all other operation modes.
5.2.1 Jog Operation 1-Forward Jog by Multi-function Terminal
The jog operation is available in either forward or reverse direction, using the keypad or
multi-function terminal inputs. The table below lists parameter setting for a forward jog
operation using the multi-function terminal inputs.
Group Code LCD Display LCD Display
Parameter
Setting
Setting Range Unit
DRV
11 Jog frequency
JOG
Frequency
10.00
0.00, Low
Freq– High
Freq
Hz
12
Jog operation
acceleration time JOG Acc Time 20.00
0.00–600.00 sec
13
Jog operation
deceleration time JOG Dec Time 30.00
0.00–600.00 sec
IN
65–
71
Px terminal
configuration
Px Define(Px:
P1–P7)
6 JOG 0-55 -
Forward Jog Description Details
Code Description
IN-65–71 Px Define
Select the jog frequency from P1- P7 and then select 6. Jog from IN-
65-71.
[Terminal settings for jog operation]