L-DALI User Manual
150
LOYTEC
Version 5.2
LOYTEC electronics GmbH
Figure 137: Select Service Pin and click Finish.
7.
Then the service pin requestor opens. Press the service pin on the replacement L-DALI
on the correct port. You can also send the service pin using the Web interface (see
Section 5.1).
8.
After the service pin has been received, LonMaker commissions the replacement
device.
9.
Repeat steps 1-8 for each CEA-709 node representing one DALI channel.
7.3.3 Working with Configuration Properties
On LDALI-10x models all application parameters which can be configured via the LINX
Configurator (see Section 7.4.6) are available as L
ON
M
ARK
configuration properties. The
LINX Configurator, on the other hand, directly modifies the values on the device when
downloading its parameters (see Section 7.4.4). Or they were changed via the web interface.
However, LNS based tools do not automatically read back CPs from the devices when
browsing them. This can result in inconsistencies between the actual CP contents on the
device and their copy in the network management tool. It is recommended to synchronize
the CPs from the device into the LNS database before editing and writing them back.
Important!
It is highly recommended to start the Configurator as LNS Plug-In when modifying and
downloading parameters! In this case the Configurator will automatically synchronize
the CP values to the LNS database.
Note:
Always choose
Current device values
or
New Device Values
for “Source of CP Values”
when commissioning or replacing a device!
