manualshive.com logo in svg

LI-COR li-6262, Инструкция по эксплуатации

Поделиться
Скачать
LI-COR li-6262 Скачать руководство пользователя страница 59

FCT 11-13

5-14

System Software

11  Print Header

Press FCT 11 to send a column header to the RS-232C port.  The headers
that are printed correspond to the channels specified by the Print List (FCT
13).  Appendix D lists the labels for each channel code.  Function 11 may be
used at any time to output a single row of column headers.

*11

12  Print Data

Press FCT 12 to send a single line of data (as defined in the Print List, FCT
13), to the RS-232C port.

*12

13  Set Print List

Print Col 1=0
NEW= __

Scrolls through 10 print
options.

Data from up to 10 channels may be sent to the RS-232C port at a specified
interval (see FCT 14).  Enter up to 10 channel codes #'s 21-29, 31-39, and
41-47.  If all 10 print options are not needed, press 

FCT

 to exit at any time.

*13x,x,x,x,x,x,x,x,x,x

 

(where x is channel code 21-29, 31-39, 41-

47, and the last 9 x values are optional).

Содержание li-6262
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды