Lexmark CX310dn, Руководство по обслуживанию

Страница: 165 / 394

Adjusting margins
Description Value Direction of change
Top margin -50 to +50
Each increment corresponds to 8 scans at a 600
dpi scan rate (0.0133 inches or 0.339 mm).
The default is 0.
A positive change moves the image down the
page and increases the top margin. A negative
change moves the image up and decreases the
top margin. No compression or expansion occurs.
Bottom margin -25 to +25
Each increment causes approximately 0.55 mm
shift in the bottom margin.
The default is 0.
A positive offset moves text down the page and
narrows the bottom margin, while a negative
offset moves text up the page and narrows the
bottom margin. The image is compressed or
expanded.
Left margin -25 to +25
Each increment corresponds to 4 pixels at 600 dpi
(0.00666 in. or 0.1693 mm).
The default is 0.
A positive change moves the image to the left,
and a negative change moves the image to the
right. No compression or expansion occurs.
Right margin -50 to +50
Each increment corresponds to an approximate
shift of 4 pixels at 600 dpi.
The default is 0.
A positive change moves the image to the left,
and a negative change moves the image to the
right.
Skew -100 to +100
Each increment corresponds to 1/1200 of an
inch.
The default is 0.
A positive value causes the left end of the scan
line to move down the page. A negative value
causes the left end of the scan line to move up
the page. The right end stays fixed. There is no
compression or expansion of the image.
6
Print another copy of the Quick Test to verify your changes.
7
Continue changing the settings by repeating steps 3 through 5.
To exit Registration, press Back or Stop .
7527
Service menus
165