Lenovo ThinkServer TD340, Руководство по установке операционной системы

Страница: 33 / 82

mount /dev/sdb /tmp/fd0
cd tmp/fd0
./replace_ahci.sh
Notes:
• Ensure that the USB storage device is connected to your server.
• In the command lines, sdb represents the drive letter of the USB storage device.
21. Press Ctrl+Alt+F6 to return to the graphics interface. Then, click Reboot to restart your server.
22. The setup process continues after the server restarts. In the Welcome window, click Forward .
23. Click Yes, I agree to the License Agreement , and then click Forward .
24. In the Firewall window, check and configure the settings, and then click Forward .
25. In the SELinux window, check and configure the settings, and then click Forward .
26. In the Kdump window, configure the settings, and then click Forward .
27. Set your time and date, and then click Forward .
28. In the Set Up Software Updates window, configure the settings, and then click Forward .
29. In the Finish Update Setup window, click Forward .
30. Set your user name and password in the Create User window, and then click Forward .
31. In the Sound Card window, configure the settings, and then click Forward .
32. When the Additional CDs window is displayed asking you if you need to install additional software
programs from a CD or DVD, depending on your needs, click Install to continue or click Finish to
complete the installation.
33. Enter your user name and password to log in to the operating system.
Installing the driver for an Ethernet card
Note: Before installing the driver for an Ethernet card, ensure that the kernel-source package and the
corresponding compiler are installed on your server.
To install the driver for an Ethernet card, do the following:
1. Copy the driver for the Ethernet card from the ThinkServer EasyStartup DVD to your local drive.
Double-click the EXE file to unzip it to a folder. Copy the folder to a USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from the USB storage device to the
/tmp
directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd e1000e
./install
Note: In the command lines, e1000e represents the driver name. Use the corresponding file name
on your server.
4. Restart your server.
5. Configure the IP address of the Ethernet card by doing the following:
a. Click System on the top-left corner of the window, and then select Network from the Administration
drop-down list box.
b. In the network configuration window, select the Ethernet card and click Edit .
Chapter 2
.
Installing an operating system in legacy mode
27