Lenovo ThinkServer TD340, Руководство по установке операционной системы

Страница: 31 / 82

e:
cd Video
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of the USB storage device and Video
represents the name of the folder that contains the driver.
3. If prompted, click Install .
4. Restart your server after the installation is completed.
Installing the driver for Intel Management Engine Interface
To install the driver for Intel Management Engine Interface, do the following:
1. Copy the driver for Intel Management Engine Interface from the ThinkServer EasyStartup DVD that
comes with your server to a USB storage device. Connect the USB storage device to your server.
2. Use the following commands to install the driver:
e:
cd Management
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of the USB storage device and Management
represents the name of the folder that contains the driver.
3. Restart your server after the installation is completed.
Installing the Red Hat Enterprise Linux AS 5.9 operating system and
drivers
Notes:
• The maximum system memory that the Red Hat Enterprise Linux AS 5.9 (x86) operating system can
support is 16 GB.
• Download the driver for onboard SAS software RAID from the Lenovo Web site to your server. Then, copy
the driver to a USB storage device. The most up-to-date device drivers for various server models are
always available on the Lenovo Web site at:
http://www.lenovo.com/drivers
To install the Red Hat Enterprise Linux AS 5.9 (x64 or x86) operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Connect the USB storage device that contains the required driver to your server. Then, start the
server from the optical drive.
2. When the welcome window is displayed, input the following command-line after
boot:
, and then press
Enter:
linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3 noprobe=ata4
3. In the Driver disk window, select Yes and then press Enter.
4. In the Insert Driver Disk window, select OK and then press Enter.
5. In the More Driver Disks window, select No .
6. In the CD Found window, depending on your needs, select OK to begin the installation media test or
select Skip to skip the media test and start the installation.
7. When the installation window is displayed, click Next .
8. Select the language that you want to use during the installation process and click Next .
9. Select the appropriate keyboard layout for the system and click Next .
Chapter 2
.
Installing an operating system in legacy mode
25