Lenovo ThinkServer TD200 Скачать руководство пользователя страница 216

Страница: 216 / 346

2. Unlock and remove the side cover (see “Removing the side cover” on page 146).

3. With your finger, slide the orange release tab in the direction indicated by the arrow on top of the fan to

unlock the fan handle. Grasp the fan handle and pull the fan

out of the fan cage assembly.

0000

00000

0000000

000

4. If you are instructed to return the hot-swap fan, follow all packaging instructions, and use any packaging

materials for shipping that are supplied to you.

Installing a hot-swap fan

Attention:

• Replace a hot-swap fan within 30 seconds of removal.

• To ensure proper cooling and airflow, do not operate the server for more than 2 minutes with the side

cover removed.

To install a hot-swap fan, complete the following steps.

1. Touch the static-protective package that contains the hot-swap fan to any unpainted metal surface on

the server; then, remove the fan from the package and place it on a static-protective surface.

2. Align the fan

over the fan slot and lower fan into the slot in the fan cage assembly.

208

ThinkServer TD200 Hardware Maintenance Manual

Содержание ThinkServer TD200



























































































































































































































































































































































Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды

Lenovo ThinkServer TD200, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды