Lenovo ThinkServer TD200 Скачать руководство пользователя страница 34

Страница: 34 / 346

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 8 “Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836” on page

257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).

• If an action step is preceded by “(Trained service technician only),” that step must be performed only by

a trained service technician.

• Go to the Lenovo support Web site at http://www.lenovo.com/support/ to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Error code

Description

Action

0051003

Uncorrectable DIMM error

1. If the server failed the POST memory test, reseat

the DIMMs.

2. Remove and replace any DIMM for which the

associated error LED is lit (see “Removing a
memory module” on page 209 and “Installing a
memory module” on page 211).

3. Run the Setup utility to enable all the DIMMs.

4. Run the DSA Preboot memory test (see “Running

the diagnostic programs” on page 70).

0051006

DIMM mismatch detected

Make sure that the DIMMs match and are installed
in the correct sequence (see “Installing a memory
module” on page 211).

0051009

No memory detected.

1. Make sure that the server contains DIMMs.

2. Reseat the DIMMs.

3. Install DIMMs in the correct sequence (see

“Installing a memory module” on page 211).

005100A

No usable memory detected.

1. Make sure that the server contains DIMMs.

2. Reseat the DIMMs.

3. Install DIMMs in the correct sequence (see

“Installing a memory module” on page 211).

4. Clear CMOS memory to re-enable all the memory

connectors.

0058001

PFA threshold exceeded

1. Update the server firmware to the latest level (see

“Updating the firmware” on page 306).

2. Reseat the DIMMs and run the memory test (see

“Running the diagnostic programs” on page 70).

3. Replace the failing DIMM, which is indicated by a

lit LED on the system board.

ThinkServer TD200 Hardware Maintenance Manual

Содержание ThinkServer TD200



























































































































































































































































































































































Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды

Lenovo ThinkServer TD200, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды