Lenovo ThinkServer TD200 Скачать руководство пользователя страница 65

Страница: 65 / 346

Keyboard, mouse, or pointing-device problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 8 “Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836” on page

257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).

• If an action step is preceded by “(Trained service technician only),” that step must be performed only by

a trained service technician.

Symptom

Action

All or some keys on the
keyboard do not work.

1. Make sure that:

• The keyboard cable is securely connected.
• The server and the monitor are turned on.

2. If you are using a USB keyboard and it is connected to a USB hub, disconnect

the keyboard from the hub and connect it directly to the server.

3. Replace the following components one at a time, in the order shown, restarting

the server each time:

a. Keyboard

b. (Trained service technician only) System board

The mouse or pointing device
does not work.

1. Make sure that:

• The mouse or pointing-device cable is securely connected to the server.

• The mouse or pointing-device drivers are installed correctly.

• The server and the monitor are turned on.

• The mouse option is enabled in the Setup utility program.

2. If you are using a USB mouse or pointing device and it is connected to a USB

hub, disconnect the mouse or pointing device from the hub and connect it
directly to the server.

3. Replace the following components one at a time, in the order shown, restarting

the server each time:

a. Mouse or pointing device

b. (Trained service technician only) System board

Chapter 5

Diagnostics

Содержание ThinkServer TD200



























































































































































































































































































































































Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды

Lenovo ThinkServer TD200, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды