Lenovo ThinkServer TD200 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 346

Lenovo ThinkServer TD200 Скачать руководство пользователя страница 50

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 8 “Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836” on page

257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).

• If an action step is preceded by “(Trained service technician only),” that step must be performed only by

a trained service technician.

Memory Logging Limit Reached
for DIMM All DIMMs on Memory
Subsystem All DIMMs.

Error

The memory logging limit has
been reached.

1. Update the server firmware to

the latest level.

Important:

Some cluster

solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify
that the latest level of code
is supported for the cluster
solution before you update the
code.

2. Reseat the DIMMs and run the

DSA memory test.

3. Replace any DIMM that is

indicated by a lit error LED.

Memory DIMM Configuration
Error for All DIMMs on Memory
Subsystem All DIMMs.

Error

A DIMM configuration error
has occurred.

Make sure that DIMMs are
installed in the correct sequence
and have the same size, type,
speed, and technology.

Memory uncorrectable error
detected for DIMM One of the
DIMMs on Memory Subsystem One
of the DIMMs.

Error

A memory uncorrectable
error has occurred.

1. If the server failed the POST

memory test, reseat the
DIMMs.

2. Replace any DIMM that is

indicated by a lit error LED.

Note:

You do not have to

replace DIMMs by pairs.

3. Run the Setup utility to enable

all the DIMMs.

4. Run the DSA memory test.

Memory Logging Limit Reached for
DIMM One of the DIMMs on Memory
Subsystem One of the DIMMs.

Error

The memory logging limit has
been reached.

1. Update the server firmware to

the latest level.

Important:

Some cluster

solutions require specific code
levels or coordinated code
updates. If the device is part
of a cluster solution, verify
that the latest level of code
is supported for the cluster
solution before you update the
code.

2. Reseat the DIMMs and run the

DSA memory test.

3. Replace any DIMM that is

indicated by a lit error LED.

42

ThinkServer TD200 Hardware Maintenance Manual

«
...
48
49
50
51
52
...
»

Содержание ThinkServer TD200



























































































































































































































































































































































Отзывы:

Нет отзывов