Lenovo ThinkServer TD200 Скачать руководство пользователя страница 123

Страница: 123 / 346

Table 4. DSA Preboot messages (continued)

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 8 “Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836” on page

257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).

• If an action step is preceded by “(Trained service technician only),” that step must be performed only by

a Trained service technician.

• Go to the Lenovo support Web site at http://www.lenovo.com/support/ to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Message
number

Component Test

State

Description

Action

215-901-xxx Optical

Drive

• Verify Media

Installed

• Read/ Write

Test

• Self-Test

Messages and
actions apply
to all three
tests.

Aborted

Drive media is
not detected.

1. Insert a CD/DVD into the drive or

try a new media, and wait for 15
seconds.

2. Run the test again.

3. Check the drive cabling at

both ends for loose or broken
connections or damage to the
cable. Replace the cable if it is
damaged.

4. Run the test again.

5. Replace the CD/DVD drive.

6. If the failure remains, go to

the Lenovo Web site for more
troubleshooting information at
http://www.lenovo.com/support.

215-902-xxx Optical

Drive

• Verify Media

Installed

• Read/ Write

Test

• Self-Test

Messages and
actions apply
to all three
tests.

Failed

Read
miscompare.

1. Insert a CD/DVD into the drive or

try a new media, and wait for 15
seconds.

2. Run the test again.

3. Check the drive cabling at

both ends for loose or broken
connections or damage to the
cable. Replace the cable if it is
damaged.

4. Run the test again.

5. Replace the CD/DVD drive.

6. If the failure remains, go to

the Lenovo Web site for more
troubleshooting information at
http://www.lenovo.com/support.

Chapter 5

Diagnostics

115

Содержание ThinkServer TD200



























































































































































































































































































































































Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды

Lenovo ThinkServer TD200, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Похожие инструкции для ThinkServer TD200

Бренды по названию

Популярные бренды