Lenovo ThinkServer TD200 Скачать руководство пользователя страница 260

Страница: 260 / 346

Air baffle pinch tab

Air baffle

2. Lower the air baffle into the server until the air baffle is seated firmly.

3. Press the power supply release tab and rotate the power supply back into the server.

Power supply support bracket

Power supply release tab

4. Install the side cover (see “Installing the side cover” on page 252).

5. Lock the side cover.

6. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.

Installing the side cover

If you removed the side cover, reinstall it.

Attention:

For proper cooling and airflow, replace the side cover before turning on the server. Operating

the server for extended periods of time (more than 30 minutes) with the side cover removed might damage
server components.

To install the side cover, complete the following steps.

252

ThinkServer TD200 Hardware Maintenance Manual

Содержание ThinkServer TD200



























































































































































































































































































































































Результаты поиска

Содержание ThinkServer TD200

Отзывы:

Lenovo ThinkServer TD200, Руководство по техническому обслуживанию аппаратной части, Страница: 260 / 346

Результаты поиска

Содержание ThinkServer TD200

Отзывы: