Lenovo ThinkAgile VX 4-Socket 4U Certified Node, Руководство пользователя

Страница: 250 / 296

Figure 145. Upper tray filler installation
Note:
Before installing the upper tray filler, make sure that the lower compute tray is removed from the
server.
Step 1. Align the upper tray filler with its opening in the upper bay at the front of the server and insert.
Step 2. Push the upper tray filler into server until it stops, making sure that the posts on the upper tray filler
fit into the slots in the upper tray filler opening.
Step 3. Secure the upper tray filler with four screws (two each side).
Install the server in the rack and replace all components. See the
Rack Installation Instructions
at https://
thinkagile.lenovofiles.com/help/topic/com.lenovo.thinkagile.7Z12/pdf_files.html
.
Complete the parts replacement
Use this information to complete the parts replacement.
To complete the parts replacement, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your server.
2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information
for each component.
3. If you have removed the server front cover, reinstall it. See “Install the front cover” on page 132.
4. Reconnect external cables and power cords to the server.
Attention:
To avoid component damage, connect the power cords last.
5. Update the server configuration.
• Download and install the latest device drivers:
https://datacentersupport.lenovo.com/us/en/solutions/
ht505302
.
• Update the system firmware. See “Update the firmware” on page 68.
• Update the UEFI configuration.
• Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See
the Lenovo XClarity Provisioning Manager Lite User Guide, which is available for download at: http://
sysmgt.lenovofiles.com/help/topic/LXPM/LXPM_introduction.html .
240
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node