Lenovo ThinkAgile VX 4-Socket 4U Certified Node, Руководство пользователя

Страница: 107 / 296

“ ” on page 89 “ ” on page 65
Before you remove an adapter from slot 10 to 15:
1. Disconnect and label all cables connected to adapters in the I/O tray; then, remove the I/O tray. See
“Remove the I/O tray” on page 152.
2. Remove the riser for slot 10 to 15 (riser 2). See “Remove the riser for slot 10 to 15 (riser 2)” on page 213.
Complete the following steps to remove an adapter from slot 10 to 15.
Watch the procedure
. A video of the installation process is available:
•
YouTube
• Youku
Figure 46. Adapter removal (slot 10 to 15)
Step 1. Open the retention latch.
Step 2. Disengage the adapter from its connector on the riser and lift the adapter from the riser.
After you remove the adapter:
• If you are removing the adapter and are not installing a replacement:
1. Install a filler in the empty adapter slot and close the retention latch.
2. Install the riser. See “Install the riser for slot 10 to 15 (riser 2)” on page 220.
3. Install the I/O tray and connect all cables. See “Install the I/O tray” on page 154.
Remove an I/O adapter from slot 16 to 17
I/O adapters in slot 16 to 17 are in an I/O tray riser that is accessed from the rear of the server. After removing
the I/O tray and the riser for slot 16 to 17, open the retention latch and remove the adapter from the riser.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
Chapter 9
.
Hardware replacement procedures
97