Lenovo ThinkAgile VX 4-Socket 4U Certified Node, Руководство пользователя

Страница: 78 / 296

Important:
The Lenovo XClarity Controller is set initially with a user name of USERID and password of
PASSW0RD (with a zero, not the letter O). This default user setting has Supervisor access. You will be
required to change this user name and password during your initial configuration for enhanced security.
Complete the following steps to connect the Lenovo XClarity Controller to the network using the Lenovo
XClarity Provisioning Manager.
Step 1. Start the server.
Step 2. When you see <F1> Setup, press F1.
Step 3. Specify how the Lenovo XClarity Controller will connect to the network.
• If you choose a static IP connection, make sure that you specify an IPv4 or IPv6 address that is
available on the network.
• If you choose a DHCP connection, make sure that the MAC address for the server has been
configured in the DHCP server.
Step 4. Click
OK
to continue starting the server.
Management options
Multiple management interfaces are available for managing your ThinkAgile VX MT 7Z12/7Z13 Series
appliances and nodes.
Learn about the “Management options” on page 17.
Manage the lifecycle
Refer to “Recommended procedure for updating a ThinkAgile VX cluster” on page 18.
Update the firmware
Several options are available to update the firmware for the server.
Refer to “Firmware updates” on page 19.
Configure the firmware
Several options are available to install and set up the firmware for the server.
Important:
Do not configure option ROMs to be set to
Legacy
unless directed to do so by Lenovo Support.
This setting prevents UEFI drivers for the slot devices from loading, which can cause negative side effects for
Lenovo software, such as Lenovo XClarity Administrator and Lenovo XClarity Essentials OneCLI, and to the
Lenovo XClarity Controller. The side effects include the inability to determine adapter card details, such as
model name and firmware levels. When adapter card information is not available, generic information for the
model name, such as "Adapter 06:00:00" instead of the actual model name, such as "ThinkSystem RAID
930-16i 4GB Flash", is displayed. In some cases, the UEFI boot process might also hang.
•
Lenovo XClarity Provisioning Manager Lite
From Lenovo XClarity Provisioning Manager Lite, you can configure the UEFI settings for your server.
Note:
The Lenovo XClarity Provisioning Manager Lite provides a Graphical User Interface to configure a
server. The text-based interface to system configuration (the Setup Utility) is also available. From Lenovo
XClarity Provisioning Manager Lite, you can choose to restart the server and access the text-based
68
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node