Lauda IN 550 XT, Руководство по эксплуатации

Страница: 41 / 172

1.
Start the Windows command processor by entering
cmd.exe
@
on
the PC with Microsoft Windows operating system.

The entry window will open.
2. There are two ways of checking:
n
Enter the ping command together with the IP address.
ping XXX.XXX.XXX.XXX
@
For "XXX.XXX.XXX.XXX", put the IP address that was entered
when the Ethernet interface was configured.
Or
n
Enter the ping command together with the serial number of the
thermostatic circulator (possible with software control system
1.36 or later).
ping serial number
@

If the Ethernet interface is configured and connected correctly,
the interface will return four responses within a very short time.
See Fig. 15.
Fig. 15: Example for entering the ping command
It is easy to check the connection to the interface with a PC and Microsoft
Windows operating system.
n
For Windows 3.11 with the program "Terminal".
n
For Windows 95/98/NT/XP the program "HyperTerminal".
n
For operating systems Windows Vista, Windows 7, Windows 8 and
Windows 10 "HyperTerminal"* is not part of the operating system.
Checking the LAN network
Check the LAN network and the process
interface
V4 Integral process thermostats with flow control unit 41 / 171