LaserPro Mercury II, Руководство пользователя

Страница: 56 / 77

- 55 -
Mercury II User Manual
5.2.3.2 Mercury II Print Driver >> Pen Page
The LaserPro Mercury II incorporates the use of 16 different colors to represent 16 different
laser power and speed settings when cutting and engraving. These colors are referred to
as “Pens”. Think of each pen as a designated laser setting, rather than as a color. As an
example, a black and white image will use only one power and speed laser setting (Black).
An image that is made up of black, red and blue colors will be processed using the laser
settings designated for each particular color. In order to utilize up to 16 different pens (laser
parameter settings), make sure your graphics software can recognize and utilizes the 16
pen colors designated by the Mercury II print driver.
If you would like to specify your own colors to designate to a particular laser setting, then all
you have to do is to double-click on that particular pen color from the pen menu and a color
manager window will open where you can select “define custom colors” to define your own
color (shown in the picture below). This is useful when your image is composed of colors
that are not part of the pen menu’s default color selection, and instead of modifying your
image, you simply assign the laser settings based on the existing colors based on your
current image.
NOTE
The Mercury II print driver cannot store more than 16 pen colors or different laser
parameter settings per file.