LaserPro Mercury II, Руководство пользователя

Страница: 50 / 77

- 49 -
Mercury II User Manual
5.2.2 Color Management
LaserPro driver uses pen color settings to control laser engraver’s engraving and cutting
parameters. In addition to having your Page Setup and Orientation properly set in your
graphics software, you will also need to make sure Color Management is DISABLED prior
to working with the LaserPro Mercury II Print Driver.
From your graphic software’s Color Management page:
•
Disable Color Management or set Color Management to Off.
Corel Draw Example (Color Management)
The following is an example of how to properly disable Color Management in the graphics
software. CorelDraw is the designated graphics software used for this example. For other
graphics software, you will need to access the corresponding Color Management page.
1) From the primary menu, click TOOLS Æ COLOR MANAGEMENT and CorelDraw’s
Color Management will appear.
2) Under the Style pull down menu, select COLOR MANAGEMENT OFF.
3) Click OK to complete the color management adjustments.