LaserPro Mercury II, Руководство пользователя

Страница: 43 / 77

- 42 -
Mercury II User Manual
Set Fine Mode Page
The Set Vector Mode Page allows you to adjust and balance vector mode’s quality and
speed settings based on your specific job. Speedy Vector Mode offers the highest output
speed, sacrificing quality. Whereas Quality Vector Mode offers the highest quality,
sacrificing output speed. Keep in mind that speed and quality are usually at a tradeoff. The
system’s default is Fine Vector mode, sacrificing some speed for higher quality. The
LaserPro Mercury II’s default setting is <Fine Vector>.
•
Modes: Quality Vector, Fine Vector, Coarse Vector, Speedy Vector
(Slower speeds / higher quality -------------------- Faster speeds / lower quality)
Set Vector Mode Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
Y
/
Z
Directional Cycle Set Vector Mode between QUALITY VECTOR / FINE
VECTOR / COARSE VECTOR / SPEEDY VECTOR
Start / Stop Back to Main Work Page
Main Work Page
Press F4
☼ Navigating to this page:
Functions Page
Select < Machine Setting >
from the menu
Machine Setting Page
Select < Set Vector Mode >
from the menu
Set Vector Mode Page