LaserPro Mercury II, Руководство пользователя

Страница: 14 / 77

Mercury II User Manual
- 13 -
1.10 TOP VIEW
1.11 Operation:
NOTE:
The maximum length of the engraving object is 450 mm (17.71 inch). The maximum
diameter of the padded rubber wheel is 94 mm. To get an accurate engraving position during rotating,
it is better that the diameter of the engraving object is not smaller than 90mm (3.54 inch). However, the
maximum diameter of the loaded object is 180mm and the limited loading weight is 7 Kg (15.4 Lb.).
1. Measure the diameter of the engraving area for setting up the software operation before
engraving.
2. Lift the lever, loading the engraving object, slide the adjustable end to the bottom of the object
firmly, then lower the lever of the fixture to secure it in place shown as in Fig II.
3. If the engraved object is too small, please use 4-inch lens to prevent collision between carriage
and rotary attachment devise.
Port
Top
Window
Screw
Holes
Lever
Track
White Mark
Ruler