LaserPro Mercury II, Руководство пользователя

Страница: 52 / 77

- 51 -
Mercury II User Manual
TIP
The following sections describe the specific functions for each of the settings found in the LaserPro
Mercury II Print Driver. If you are new to laser engraving, it is recommended that you first familiarize
yourself with the general principles of the laser process in Section 6, especially the Vector Cutting and
Raster Engraving concepts. This will make it easier to understand the various descriptions and
terminologies used in this section.
5.2.3.1 LaserPro Mercury II Print Driver >> Option Page
Mode Setting (OPTION PAGE)
[DEFAULT SETTING: Black & White]
You can select from four primary mode settings, depending on your application or results
you would like to achieve.
Black & White: Select this mode when using clipart images or drawings with several colors,
shades of gray, or many outlines. This mode outputs in a method similar to that of a black
and white laser printer. The entire selected image will be engraved using a single set of
power and speed settings (the black pen from the PEN menu. Please refer to the next
section of the manual for details regarding the PEN functions). The LaserPro Mercury II
print driver will interpret colored and shaded areas as different shades of gray by producing
a halftone effect while engraving. Instead of engraving only solid lines, gray/halftone