LaserPro Mercury II, Руководство пользователя

Страница: 47 / 77

- 46 -
Mercury II User Manual
5.2 The LaserPro Mercury II Print Driver
With the LaserPro Mercury II print driver successfully installed, you will need to adjust the
printer and page size default settings before you can begin editing and completing jobs. By
doing so, you will be setting the work area in your graphics software to match the LaserPro
Mercury II’s worktable area.
NOTE
Please make sure Mercury II is set to the default printer before proceeding to
the page and layout setup.
„ Ensure that the LaserPro Mercury II has been selected as the DEFAULT
PRINTER. You can do so by going into your Windows Control Panel
Æ Printers
and Faxes.
If LaserPro Mercury II is not selected as DEFAULT PRINTER, you may set it up through the
graphics software as well. The following example takes Corel Draw to demonstrate how to
set up LaserPro Mercury II as the Printer.
1)
From the primary menu, click FILE Æ PRINT SETUP.
2)
From the navigation bar Name, click Mercury II Æ OK