LaserPro Mercury II, Руководство пользователя

Страница: 55 / 77

- 54 -
Mercury II User Manual
SmartACT (Option Page)
[DEFAULT SETTING: Unselected]
SmartACT is reduces the amount of time it takes to process a job, by eliminating
unnecessary travel of the laser carriage at the expense of some quality. Usually the quality
loss is minimal, but will depend on the image or design you are working with; please take
some time to experiment with your particular design to determine whether the tradeoff is
acceptable.
TIP
There is a greater performance gain when enabling SmartACT for designs that are
vertically longer than they are horizontally wide, as the SmartACT optimization
modifies the movement of the X-axis of the laser carriage.
File Function (Option Page):
The file function section allows you to manage various laser parameters. This section is
useful when performing duplicate jobs on a variety of objects, allowing you to save your
frequently used laser parameters and load them in the future.
•
History File: This section contains a list of the recent files you have recently created
and worked with.
•
Save: This function will save the current print driver parameter settings to a file and
location on your computer of your selection. (Saved parameter setting files will be
tagged with the .Gai extension)
•
Load: This function allows you load previously saved print driver parameters.
•
Original: This function will load the print driver’s original factory parameter settings.
•
Save To Default: This function allows you to save your current print driver parameters
as the default start-up settings.
•
Delete: This function will delete the file you select from the History File section. Please
note the Delete function only removes the file from the history file section, it does not
remove the .Gai file from your hard drive, if you wish to completely remove the file from
your hard disk, then you will have to manually delete the file from your operating
system.)
NOTE
If you are using Windows 2000 or XP as your operating system, then make sure you
log in with an administrator or administrator-rights account in order to properly save
laser parameter settings.