LaserPro Mercury II, Руководство пользователя

Страница: 44 / 77

- 43 -
Mercury II User Manual
Other Page
The Other Page allows you to change various settings that correspond to the control panel.
The Language setting will allow users to change available languages displayed by the control
panel. The Unit setting will allow you to change whether the units displayed by the control
panel is in the metric or imperial system. The EOF (end of file) Alarm setting will enable or
disable an audible notification when your jobs are complete. The Air Delay setting allows you
to specify the delay in seconds of the SmartAIR air-assist after the point of laser firing.
•
Language: ENGLISH (others dependent on Firmware)
•
Unit: METRIC / ENGLISH
•
EOF Alarm: YES / NO
•
Air Delay: 1-100 seconds
TIP
Depending
on
the material you are engraving with, your
laser settings, and the desired results, please experiment with the air
delay to achieve your desired results.
Other Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
U
/
V
Directional Scroll through the menu selections
Y
/
Z
Directional Adjust the value for that selection
Start / Stop Back to Main Work Page
Main Work Page
Press F4
☼ Navigating to this page:
Functions Page
Select < Machine Setting >
from the menu
Machine Setting Page
Select < Other > from the
menu
Other Page