Lantronix
ION x6010 User Guide
33493 Rev. F
Page 160 of 261
Cannot remove vlan on this card!
You entered a command to delete one or all VLANs from the NID, but the action cannot be performed.
For example:
C1|S7|L1D>
remove vlan all
Cannot remove vlan on this card!
C1|S7|L1D>
remove vlan vid=3
Cannot remove vlan on this card!
C1|S7|L1D>
1.
Make sure this is the function that you want.
2.
Use the
go
command to switch to a NID that supports the VLAN database.
3.
Use the
add vlan-db
command to add a VLAN VID if needed.
4.
If the problem persists, contact Technical Support.
Cannot remove forward database rows on this card!
You entered a command to delete a VLAN forward database VID (forward database row) from the NID,
but the action cannot be performed. For example:
C1|S7|L1D>
remove vlan-db vid 3
Cannot remove forward database rows on this card!
C1|S7|L1D>
1.
Make sure this is the function that you want.
2.
Use the
go
command to switch to a NID that supports the VLAN FDB.
3.
If the problem persists, contact Technical Support.
Error: location parameter should be digital number
!
You entered a letter or special character as part of the
go
command. For example:
C1|S7|L1P2>
go c=s s=5 l1d
Error: location parameter should be digital number!
C1|S7|L1P2>
1.
Re-enter the
go
command with the correct syntax (e.g., change the letter
s
to a number in the exam-
ple above).
2.
Retry the operation. See “
Section 6: Command Line Interface (CLI) Reference
”.
3.
If the problem persists, contact Technical Support.
