Lantronix
ION x6010 User Guide
33493 Rev. F
Page 158 of 261
Cannot set speed on this port!
You entered the CLI command to define the NID port’s operating speed, but the command failed.
For example:
C1|S5|L1P2>
set ether speed 100M
Can not set speed on this port!
C1|S5|L1P2>
1.
Verify the NID supports this speed.
2.
Verify the command syntax.
3.
Re-enter the
set ether speed=
command with a speed supported by the card.
4.
If the problem persists, contact Technical Support.
Fail to set port advertisement capability!
This message indicates that the capabilities specified for the Set Ethernet Port Advertisement Capability
(set ether adv-cap) command are not valid choices. For example:
C1|S5|L1P2>set ether adv-cap 1000XFD
C1|S5|L1P2>
set ether adv-cap 1000XHD
Fail to set port advertisement capability!
C1|S5|L1P2>
1.
Verify the x6010 supports this capability.
2.
Verify the command syntax.
3.
Retry the operation. For a complete list of the available commands, see “Section 6: CLI Reference”.
4.
Use another (supported) command, or use the go command to switch to a device that supports this
function.
5.
If the problem persists, contact Technical Support.
