LANCIER Monitoring RTS 1000, Оригинальная инструкция по эксплуатации

Страница: 6 / 56

Page 6
Legal provisions
Liability
The information, data and references specified in this operating instruction were up-to-date on the day of print.
Claims on systems already supplied can only be asserted conditionally from details, illustrations and descrip-
tions.
LANCIER Monitoring GmbH assume no liability for damages and disruption of operations, which may result
from:
• Non compliant use
• Arbitrary change to the equipment
• Improper work on and with the equipment
• Operating and setting error
• Disregarding existing standards, directives and accident prevention regulations
• Disregarding operating instruction
Warranty
• Warranty takes place according to the general terms and conditions of LANCIER Monitoring GmbH.
• Warranty claims must be asserted to LANCIER Monitoring GmbH immediately upon detecting a fault or fail-
ure.
• The warranty terminates in all cases where also no liability claims can be asserted.
General
This operating instruction is valid for the the pressurization system RTS 1000 and its variants.
It shall help you to get to know the product and contains important information to operate the system safely,
properly and economically, to make use of the range of functions, to lessen repair costs and down times, as
well as to increase the reliability and service life of the equipment.
Furthermore, this manual will enable you to carry out maintenance and repair work on the pressurization sys-
tem yourself for daily use.
It contains safety instructions, which must be observed.
During operation, other instructions must be observed if necessary for components to be installed optionally,
such as flow meter, distribution devices etc.
The operating instruction is supplemented with instructions on the basis of current national regulations on
accident prevention and environmental protection.
The operating instruction must always be on hand at the point where the equipment is used, complete and in
legible condition.
The operating instruction shall be read and applied by anyone assigned to work with/on the
system, e.g. during
• operation, including installation, setting up, fault repair in the production flow, removal of
production waste, care, disposal of materials.
• Maintenance (servicing, inspection, repair)
• Transportation
Besides the instruction manual and the accident prevention regulations applicable in the country and site of
use, the recognised specialised rules for safe and professional work shall also be observed.
This documentation was compiled with the utmost diligence, taking the existing regulations into consideration.
However, variations cannot be excluded. LANCIER Monitoring reserves the right to make technical modifica-
tions to the pressurization system without prior notification and assumes no legal responsibility or liability for
damages, which may arise.
Any necessary changes are promptly incorporated into the current versions of this operating instruction.