LANCIER Monitoring RTS 1000, Оригинальная инструкция по эксплуатации

Страница: 23 / 56

Page 23
Read MFR settings
Menu selection:
Menu D1
>Disp. Ddevice : MFR
press soft key „select“
Menu D2.2
>MFR – Settings
press soft key „select“
Display D3.6 „MFR - Settings“ appears:
By scrolling with the soft keys ( 45 ) „up“ and „down“ the following fixed values
appear consecutively in the display:
Display Parameter Value range
- Valve 1 : value s runtime of solenoid valve Y1 in seconds 0 .. 250 sec
- Valve 2 : value s runtime of solenoid valve Y2 in seconds 0 .. 250 sec
- Valve Pause : value s runtime rest of the solenoid valves -125 .. +125 sec
(- = overlap, + = rest in seconds)
- Valve F-up : value s solenoid valve stopping time after switch-off of 0 .. 250 sec
the compressor in seconds
- Comp S-up : value s opening time (+) resp. closing time (-) of both valves
in seconds, to prevent the starting of the
compressor against counter pressure
-125 .. +125 sec
- Runtime max : value s maximum compressor runtime in seconds 0 .. 10.000 sec
- Maint. max : value h maintenance interval in hours 0 .. 10.000 h
- Operating : value h total operating hours of the pressurisation equipment 0 .. 99.999 h
(set-up see service mode, page 26)
Read MFR info
Menu selection:
Menu D1
>Disp. Device : MFR
press soft key „select“
Menu D2.2
>MFR – Info
press soft key „select“
Display D3.7 „MFR - Info“ appears:
Version, date and time of the MFR software release are displayed.
Display settings
Menu selection:
Menu D1
>Display Settings
press soft key „select“
Display D2.3 „Display Settings“ appears:
Choose the value to edit by scrolling with the soft keys ( 45 ) „up“ and „down“:
Brightness = brightness of the display (value 0 - 15)
Timeout (min) = time period in minutes after which the display goes out if not used (value 0 - 250 min.).
Pressing the soft key „select“ chooses the value.
Pressing the soft keys ( 45 ) „up“ and „down“ raise or lower the value.
Pressing the soft key „set“ stores the set value.
Read display info
Menu selection:
Menu D1
>Display Info
press soft key „select“
Display D2.4 „Display Info“ appears:
Version, date and time of the display software release are displayed.
MFR - Settings
>Valve 1 : 60s
Valve 2 : 60s
Valve Pause : 0s
Valve F_up : 60s
______________________
up | down | select
MFR - Info
Software Vers. :V100
Date : 12-Jun-06
Time : 11:55:24
______________________
| | back
Display Settings
Brightness : 10
Timeout[min] : 30
>back
______________________
up | down | select
Display Info
Software Vers. :V101
Date : 16-Jun-06
Time : 12:40:08
______________________
| | back