LANCIER Monitoring RTS 1000, Оригинальная инструкция по эксплуатации

Страница: 10 / 56

Page 10
Safety devices
Safety devices are put in place for the health and safety of employees employed on the equip-
ment and protects the equipment against damage. The devices must be inspected regularly.
• The equipment may only be operated with functioning protective devices.
• The electrical components shall be provided with a cover plate. This must be mounted during operation.
• The safety devices must protect all moving and electrical parts and may not be handled or cancelled.
Before starting up equipment, ensure that the safety devices are mounted and functional.
The safety devices may only be removed
• After complete shutdown of equipment
• With safeguarding against warm restart of equipment
Remaining dangers
The dangers emanating from the equipment, occur during work inside the metal cabinet and
within the actual boundaries of the equipment, if the equipment has to be started up, e.g. for
• maintenance
• refitting
• fault diagnostics and remedy
In maintenance and refitting work, for which the equipment has to be started up, a second per-
son should always be present to disconnect the equipment in an emergency situation.
Always carry out work with greatest care and attention!
Watch out for the following dangers:
• Risk of injury by getting caught in the movement area of the compressor.
• Risk of injury caused by squashing and shutting in upper and lower limbs when assembling and disassem-
bling the equipment.
• Risk of injury caused by squashing and shutting in upper and lower limbs when transporting equipment.
Service conditions
Temperatures
• Ambient temperature limit: +1 °C to + 40 °C
Sound function is guaranteed in this temperature range.
• Temperatures outside of this range do not guarantee the functionality of the equipment.
Ambient conditions
• Environmental media, especially chemically aggressive, can corrode seals, hoses, cables and plastics.
• Ambient media, especially chemically aggresive ones, might affect seals, hoses, cables and other plastic ele-
ments.
Installation conditions
• The equipment should be installed in a dry, dust and frost-free room, while adhering to the general guidelines
for work places.
• Furthermore, the equipment must be installed on a firm, load-bearing and level ground.