SMART Spectro 2 Operator’s Manual 04.16
47
SEQUENCES OF TESTS
SEQUENCE 1
,
SEQUENCE 2
, and
SEQUENCE 3
are alterable sequences. They may be edited
using the
EDIT
function mode. Any of the LaMotte pre-programmed tests or User Tests
may be placed in these sequences in whatever testing order that is preferred. Some
examples of typical sequences are given below.
SEQUENCE 1
SEQUENCE 2
SEQUENCE 3
60 Molybdenum-LR
1 Alkalinity-UDV
3 Ammonia-N L F
79 Phosphate H
35 Cyanide
32 Copper DDC
9 Bromine-LR
41 Fluoride
64 Nitrate-N LR
76 pH TB
53 Iron Phen
67 Nitrite-N LR
15 Chlorine
55 Manganese L
74 pH CPR
86 Silica HI
64 Nitrate-N LR
78 Phosphate L
45 Hydrazine
26 COD SR 0-1500
85 Silica Lo
32 Copper DDC
77 Phenols
END OF LIST
51 Iron Bipyr
78 Phosphate L
END OF LIST
90 Sulfi de-LR
END OF LIST
NOTE: Sequences always end with
END OF LIST
to indicate that there are no more tests in
the sequence.
These alterable sequences allow a series of tests to be setup that are run frequently. The
order of the individual tests in the sequence is determined by the user. After running a
test, press
EXIT
to escape back to the Sequence menu. Move the
down to the next
test listed and press
*ENTER
. Continue this pattern until the entire sequence has been
completed.
ALL TESTS
is a fi xed sequence containing the LaMotte pre-programmed tests and User
Tests.
Modifi cation of the alterable sequence is accomplished through the
EDIT
function. This
function is explained in detail in the section titled
EDIT
.
It should be noted that if a %T/ABS test is to be included in a sequence, the
%T/ABS test must fi rst be setup as a User Test (but no actual calibration needs to be
performed, only select a name and wavelength).
Pressing the
EXIT
button while in a sequence menu will escape back to the
PROGRAMMED
TESTS
menu.
Pressing and holding the
OFF
button at any time will turn the SMART Spectro 2 off .
www.
GlobalScientificSupply
.com
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
