LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 73 / 115

73
5.3 Cleaning the AIT Drive
When the AIT drive needs to be cleaned, the following message appears on
the LCD panel:
Clean the drive by setting the Cleaning cartridge (sold separately) in the AIT
drive. To set the cleaning cartridge, specify the slot and the AIT drive with an
element address. For information about element addresses, refer to
3.9
Assigned Element Addresses .
Important Note: First set the cleaning cartridge in the LaCie AIT
Library, then move it to the AIT drive. Check in advance which slot is not
occupied. For information about how to check, refer to
4.4 Viewing
Cartridge Information .
1) At the status display, press the [MENU] button for two seconds.
2) Press the button once to select “2.Eject/Insert”, then press the [ENTER]
button.
“Eject/Insert” appears.
3) Select “3.Insert Into Library”, then
press the [ENTER] button.
4) Select “1.SingleMode”, then press
the [ENTER] button.
5) Use the and buttons to set
the element address of the slot where
the cleaning cartridge is going to be
set, then press the [ENTER] button.