53
Important Note:
For information about “Date & Time” of the
Configuration Menu, refer to
2.11.1 Setting the Date and Time
.
3.7.1 Disabling the Life Warning Display
When the device is shipped from the factory, the life warning is set to display.
This default setting is recommended. (Thus the following setup is unnecessary.)
Change this setting in “Warning” of the Configuration Menu.
Important Note:
The displaying of the life warning can also be set
through a browser.
1) At the status display, press the [MENU] button for two seconds.
2) Press the button four times to select “5.Configuration”, then press the
[ENTER] button.
3) Select “2.Warning”, then press the
[ENTER] button.
4) Use the
and buttons to select
“YES”, then press the [ENTER] button.
The default factory setting is “YES”.
Select “NO” to not display the
warning.
5) When “[ENTER] to activate”
appears, press the [ENTER] button.
The life warning is now set.
The display returns to the menu.
6) Press the [CANCEL] button twice to return to the status display.
3.7.2 Setting the Bar Code
When the LaCie AIT Library is equipped with a bar code reader, in “Barcode”
of the Configuration Menu, configure the bar code settings so that the bar
code affixed to the cartridge can be read.
Содержание 107416 - 1.6/4.16TB AIT3 2U 16SLOT
Страница 1: ...1 LACIE AIT LIBRARY USER S GUIDE...
Страница 40: ...40 The top page of the Library Administration Menu appears Example When using Microsoft Internet Explorer...
Страница 78: ...78 The top page of the Library Administration Menu appears Example When using Microsoft Internet Explorer...
