LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 33 / 115

33
Setting the Cartridge
Set the cartridge into the LaCie AIT Library. When setting the cartridge, specify
the slot by its element address. For information about element addresses,
refer to section
3.9 Assigned Element Addresses .
1) At the status display, press the [MENU] button for two seconds.
2) Press the button once to select “2.Eject/Insert”, then press the [ENTER]
button.
“Eject/Insert” appears.
3) Select “3.Insert Into Library”, then
press the [ENTER] button.
4) Select the cartridge insertion
method, then press the [ENTER]
button.
• When you want to specify a slot and insert the cartridge in it, select
“1.Single Mode”.
•
When you want to insert several cartridges consecutively, select “2.Multiple
Mode”. In this case, you only need to specify the first slot.
5) Use the and buttons to set the
element address of the slot where the
cartridge is going to be set, then press
the [ENTER] button.
6) When “[ENTER] to activate”
appears, press the [ENTER] button.