LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 63 / 115

63
4.2.2 Replacing the Cartridges
When replacing a cartridge, specify the slot using the element address. For
information about element addresses, refer to
3.9 Assigned Element
Addresses .
To replace a cartridge set in the LaCie AIT Library:
1) At the status display, press the [MENU] button for two seconds.
2) Press the button once to select “2.Eject/Insert”, then press the [ENTER]
button.
“Eject/Insert” appears.
3) Select “1.Eject From Library”, then
press the [ENTER] button.
If the cartridge to be taken out is set
in the AIT drive, select “2.Eject From
Drive”.
4) Select the cartridge ejection
method, then press the [ENTER]
button.
•
When you want to specify one slot and eject its cartridge, select “1.Single
Mode”.
•
When you want to eject several cartridges consecutively, select “2.Multiple
Mode”. In this case, you only need to specify the first slot.
5) Use the and buttons to set
the element address of the slot where
the cartridge to be taken out is set,
then press the [ENTER] button.
6) When “[ENTER] to activate”
appears, press the [ENTER] button.