LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 60 / 115

60
4. Operating the LaCie AIT Library
4.1 Overview
This chapter explains how to take out, change and move the cartridges, how
to view information about the LaCie AIT Library, cartridges and errors, and
how to test the hardware.
4.2 Using the Cartridges
This section explains steps to take out, change and move the cartridges. For
information about how to prepare and load the cartridges, refer to
2.11.3
Setting the Cartridges .
4.2.1 Taking Out the Cartridges
To take out a cartridge set in the LaCie AIT Library or AIT drives, specify the
slot with the element address.
For information about element addresses, refer to 3.9 Assigned Element
Addresses .
To take a cartridge out of the LaCie AIT Library:
1) At the status display, press the [MENU] button for two seconds.
2) Press the button once to select “2.Eject/Insert”, then press the [ENTER]
button.
“Eject/Insert” appears.
3) Select “1.Eject From Library”, then
press the [ENTER] button.
If the cartridge to be taken out is set
in the AIT drive, select “2.Eject From
Drive”.
4) Select the cartridge ejection
method, then press the [ENTER]
button.
•
When you want to specify one slot and eject its cartridge, select “1.Single
Mode”.
• When you want to eject several cartridges consecutively, select “2.Multiple
Mode”. In this case, you only need to specify the first slot.