68
20) When the initialization ends, press the [CANCEL] button three times to
return to the menu display.
4.2.3 Moving the Cartridges
It is possible to move a cartridge from a slot to the AIT drive or vice versa. Set
the cartridge in the slot before performing the procedure below. When moving
a cartridge, specify the slot with the element address. For information about
element addresses, refer to
3.9 Assigned Element Addresses
.
Important Note:
•
It is not possible to move a cartridge between slots. When you want to set a
cartridge in a different slot, first move the cartridge, then set it in a
different slot.
•
It is not possible to remove a cartridge directly from the AIT drive. Perform
the procedure below, move the cartridge to the desired slot, and then
remove it.
1) At the status display menu, press the [MENU] button for two seconds.
2) Press the button twice to select “3.MoveTape”, then press the [ENTER]
button.
3) Use the
and buttons to set
the element address of the slot that
has the moving source cartridge, then
press the [ENTER] button.
Important Note:
“DR” indicates an AIT drive.
4) Use the
and buttons to set the element address of the destination slot,
then press the [ENTER] button.
5) When “[ENTER] to activate”
appears, press the [ENTER] button.
The cartridge moves to a new slot,
and the display returns to the menu.
6) Press the [CANCEL] button to return to the status display.
Содержание 107416 - 1.6/4.16TB AIT3 2U 16SLOT
Страница 1: ...1 LACIE AIT LIBRARY USER S GUIDE...
Страница 40: ...40 The top page of the Library Administration Menu appears Example When using Microsoft Internet Explorer...
Страница 78: ...78 The top page of the Library Administration Menu appears Example When using Microsoft Internet Explorer...
