LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 36 / 115

36
1) Setup the network.
2) Connect a network cable.
3) Access the library from a browser.
Important Note: For information about how to use the browser to
configure individual settings and view status information, refer to 6.2 Library
Administration Menu .
In order to configure and maintain the library through a browser, browser
software must be installed in the computer. Operating systems and browsers
that are compatible with this library are as follows:
Operating systems:
Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows Me,
Microsoft Windows 2000, Microsoft XP and Microsoft Windows NT
Server 4.0
Browsers:
Microsoft Internet Explorer 5.01 or later
Netscape Communicator 4.7 or later
Setting the Network
In order to connect to the network, use the Network Menu of the control panel
to configure the necessary settings, such as the IP address setting.
Important Note: After connecting to the network, a browser can be
used to change network settings.
The LaCie AIT Library does not support DNS (the [DNS] setting of the Network
Menu is not supported).
You can obtain the LaCie AIT Library’s MAC address from the Network Menu.
1) At the status display, press the [MENU] button for two seconds.
2) Press the button five times to
select “6.Network”, then press the
[ENTER] button.
“Network” appears.
3) When you want to set the host
name, select “1.Host”, then press the
[ENTER] button.