LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 13 / 115

13
1.2.2 Rear
1 – Power Supply Connector Plug the provided power cord into this
connector.
2 – Power Switch In order to turn on the library power, press this
power switch. When this power switch is
pressed to turn off the power, first perform the
system shutdown procedure from the control
panel, then press this power switch.
3 – Fan Unit Please be careful not to block the ventilation
holes. If the ventilation holes are blocked, the
LaCie AIT Library may overheat, resulting in fire
or other damage.
4 – Transport Switch During installation, remove the transport screw
and set it in the bottom hole (safe position).
During transport, make sure that the transport
screw is in the upper hole (transport position).
5 – SCSI Connector 1 For information about connecting the SCSI
connectors, please refer to section
2.7
Connecting to the Host Computer and
section 2.9 Connecting SCSI Peripheral
Devices .
6 – SCSI Connector 2 For information about connecting the SCSI
connectors, please refer to section
2.7
Connecting to the Host Computer and
section 2.9 Connecting SCSI Peripheral
Devices .
7 – LAN Connector Connect a 10Base-T/100Base-TX network cable
here.