LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 27 / 115

27
When using DHCP, wait at least 30 seconds.
Then, go to section 2.11 Initial Setup .
Important Note: If you start the host computer before the library, the
SCSI ID is not detected correctly. Therefore, you must always start the library
before starting the host computer. If the library does not work as above, refer
to section
8.3 Troubleshooting .
Turn the Power Off
Before turning off the library, perform the system shutdown procedure from
the control panel. When you have performed the procedure, you can turn off
the library.
1) At the status display, press the [MENU] button for two seconds.
2) Press the button to select “9.
System Down”, then press the [ENTER]
button.
3) Select “2.Shutdown”, then press
the [ENTER] button.
4) When “[ENTER] to activate”
appears, press the [ENTER] button.
The system performs the shutdown
procedure.
5) When the message to the right
appears, turn off the library by
pressing the power switch on the rear.