75
9) When “[ENTER] to activate”
appears, press the [ENTER].
The shutter closes and the
initialization is performed.
10) When the initialization ends, press the [CANCEL] button twice to return to
the menu, select “3.MoveTape”, then press the [ENTER] button.
11) Use the
and buttons to set
the element address of the slot where
the cleaning cartridge is set, then
press the [ENTER] button.
12) Using the
and buttons, select “DR”, then press the [ENTER] button.
13) When “[ENTER] to activate”
appears, press the [ENTER] button.
The cleaning cartridge moves to the
AIT drive, and cleaning begins. The
display returns to the menu. Press the
[CANCEL] button to return to the
status display. When cleaning is
completed, the status in the upper-left
corner of the display changes from
“CLEAN” to “READY”.
14) Use the Move Tape Menu to move the cleaning cartridge from the AIT
drive to the AIT library.
15) Use the “Eject From Library” of the Eject/Insert Menu to take out the
cleaning cartridge.
16) Press the [CANCEL] button three times to return to the status display.
Important Note:
If an error occurs, repeat the cleaning procedure.
Содержание 107416 - 1.6/4.16TB AIT3 2U 16SLOT
Страница 1: ...1 LACIE AIT LIBRARY USER S GUIDE...
Страница 40: ...40 The top page of the Library Administration Menu appears Example When using Microsoft Internet Explorer...
Страница 78: ...78 The top page of the Library Administration Menu appears Example When using Microsoft Internet Explorer...
