LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 18 / 115

18
2. Installation
2.1 Overview
This chapter explains general procedures for positioning the LaCie AIT Library,
connecting it to the host computer and turning on the library power. This
chapter also explains initial setup. Installation and setup steps may very
depending on your system.
After turning on the power, make settings required to use the unit as
explained in section
2.11 Initial Setup .
2.2 Unpacking
Important Note: You will need the box, packing materials and
transport screw if you wish to move or transport the LaCie AIT Library in the
future. Retain them for future use.
1) Remove the LaCie AIT Library from the box as indicated on the box.
Remove the packing materials, such as plastic covers and tape.
2) With a coin, remove the transport screw from the rear of the library and set
it in the rear hole (safe position).
Remove the transport screw by turning it counterclockwise.