LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 54 / 115

54
Warning! When the LaCie AIT Library is not equipped with a bar code
reader, do not change the setting to “YES” as this causes an error to be
displayed when the library starts or when a cartridge is set.
Important Note: The setting of the bar code can also be configured
through a browser.
1) At the status display, press the [MENU] button for two seconds.
2) Press the button four times to select “5.Configuration”, then press the
[ENTER] button.
3) Select “3.Barcode”, then press the
[ENTER] button.
4) Use the and buttons to select
“YES”, then press the [ENTER] button.
The default factory setting is “NO”.
Select “YES” to read the bar code.
5) When “[ENTER] to activate”
appears, press the [ENTER] button.
When the bar code is read, the library
returns to the menu display.
6) Press the [CANCEL] button twice to return to the status display.
3.7.3 Setting the R-MIC Function
In “R-MIC” of the Configuration Menu, enable the R-MIC function in order to
use the AIT3 cartridge.
Important Note:
•
When using AIT1 or AIT2 cartridges, leave this setting to “NO”.
•
The R-MIC function can also be set through a browser.
1) At the status display window, press the [MENU] button for two seconds.