LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 106 / 115

106
Verify that the cartridge is not damaged.
Try cleaning the AIT drive.
→
5.3 Cleaning the AIT
Drive
The cartridges cannot
be taken out. Follow the instructions in section 4.2.1 Taking Out
the Cartridges. If you are still unable to take out
the cartridge, please contact your reseller or LaCie
Technical Support for assistance.
Other Issues Verify the shutter of the cartridge dock is closed
tightly.
When you set or remove a cartridge and “Error
07000001” appears, then on the “Configuration”
menu, set “Barcode” to “NO”. Restart the library.
When the LaCie AIT Library is not equipped with a
bar code reader and the bar code setting is “YES”,
an error appears when a cartridge is set or ejectd.
Perform a diagnostic test on the AIT library.
→
6.5.5 Diagnostic
7.4 Transporting the LaCie AIT Library
If you are transporting the LaCie AIT Library for any reason, such as moving
offices or repairing the library, make the following precautions:
•
When packing, perform the unpacking procedure in 2.2 Unpacking in
reverse. Be sure to fasten the transport screw.
•
Take out all the cartridges set in the library. If the cartridges cannot be
taken out by operating the control buttons, refer to
7.3 Troubleshooting
– “The cartridge cannot be taken out”.
•
In order to turn off the power to the LaCie AIT Library, first press the front
power standby switch, then press the power switch on the rear. When the
power standby switch is pressed, the internal mechanism moves to the
appointed position, then the power enters the standby state.
•
Remove all the cables, such as the power cable, the SCSI cable, the
terminator and the network cable.
7.5 Hardware Specifications
7.5.1 Hardware
AIT Drive
LIB-81/A1: SDX-400C/L (1)
LIB-81/A2: SDX-500C/L (1)
LIB-81/A3: SDX-700C/L (1)
Number of drives that can be installed
One drive