LaCie 107416 - 1.6/4.16TB AIT3 2U 16SLOT, Руководство пользователя

Страница: 104 / 115

104
Push it in until it clicks into place.
5) Change the other filter using the same steps.
7.3 Troubleshooting
In the event that your LaCie AIT Library is not working correctly, please refer to
the following checklist to find out where the problem is coming from. If you
have gone through all of the points on the checklist and your library is still not
working correctly, please have a look at the FAQs that are regularly published
on our Web site –
www.lacie.com
. One of these FAQs may provide an
answer to your specific question. You can also visit the drivers pages, where
the most recent software updates will be available.
If you need further assistance, please contact LaCie Technical Support (see 8.
Contacting Customer Service for details).
The Problem Possible Solutions
The LaCie AIT Library
does not work.
Verify that the power switch is turned on.
Verify that the power cable is connected correctly.
Verify that the shutter of the cartridge dock is
closed.
Verify that the terminator is attached correctly.
Verify that the SCSI cable is correctly connected
from the LaCie AIT Library to the host computer.
Verify that the power of the host computer is on.
Verify that an error code is displayed on the LCD
panel of the LaCie AIT Library. For information
about error codes, refer to 7.8 Error Code List.
Verify that 10 seconds after restart the power is
turned on.
After restarting the library, when “Error
07000001” appears, press the [CANCEL] button
twice, then on the “Configuration” menu, set
“Barcode” to “NO”. Restart the library. When the
LaCie AIT Library is not equipped with a bar code
reader and the bar code setting is “YES”, an error
appears when the library starts or a cartridge is
set.
The LaCie AIT Library
and the host computer Verify that the SCSI IDs of the library, AIT drives
and host computer are unique. Duplicate SCSI IDs