manualshive.com logo in svg

Labrie MINIMAX, Руководство по обслуживанию

Поделиться
Скачать
Labrie MINIMAX Скачать руководство пользователя страница 13

2

Safety

It is mandatory to read the entire 

Operator Manual

 

before performing any maintenance task on this 
vehicle.

Conventions

Basic Safety Notions

The following safety notions are related to the use of 
the M

INIMAX

™. It is important to point out that the 

safe use of the vehicle remains the user’s responsibility. 
He must heed all safety notions explained in this 
manual and on the decals found on the vehicle.

Danger!

Indicates a hazardous situation which, if 
not avoided, 

will

 result in serious injury or 

death.

Warning!

Indicates a hazardous situation which, if 
not avoided, 

could

 result in serious injury 

or death.

Caution!

Indicates a hazardous situation which, if 
not avoided, could result in 

minor or 

moderate injury.

Danger!

Always be aware of the vehicle’s 
surroundings to make sure that no 
pedestrians, passersby, bystanders, or 
other people or vehicles are in any way 
exposed to any danger caused by the 
use of the M

INIMAX

™.

Содержание MINIMAX















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды