STE User’s Manual
Installation
Rel. 2.6
2-23
1. To change the setting, press
CHANGE
to toggle between ENABLED or DISABLED.
2. If a change is not required or after a new setting is made, pressing
SCROLL
advances the
display to the INITIATE STE ON VOICE BEARER menu (Paragraph
3. Press
BACK
to return the display to the NETWORK SETTINGS menu (
2-5.9.6 Set INITIATE STE ON VOICE BEARER
Voice Bearer Secure Capable Test (VBSCT) provides enhanced capabilities on ISDN voice bearers when
they support digital transmissions. Rather than automatically reverting to STU signaling on voice bearers,
as previous releases have, the STE now automatically tests voice bearers to determine if they (and the
connected terminal) will support STE signaling. If the test passes, you gain the advantages of the STE’s
superior secure call setup time, secure voice quality, and data transfer at rates to 38.4 kbps. If the test
fails, the STE will revert to SCIP Signaling or STU signaling for secure operation. Where STE signaling
on voice bearers is supported, you can establish calls in the non-secure (traditional) mode, take
advantage of switch features (Hold, Transfer and Non-secure Conferencing) and still have the enhanced
STE performance in secure modes. These features are generally not available on data bearers.
The INITIATE STE ON VOICE BEARER menu (
) shows whether the feature is ENABLED or
DISABLED. The default setting is “ENABLED”.
Figure 2-30. INITIATE STE ON VOICE BEARER Menu
1. To change the setting, press
CHANGE
to toggle between ENABLED or DISABLED.
2. If a change is not required or when the setting is made, pressing
SCROLL
advances the display
to the STE-210 RECEIVE SECURE DIAL menu (Paragraph
3. Press
BACK
to return the display to the NETWORK SETTINGS menu (
2-5.9.7 STE-210 Receive Secure Dial
This option allows you to disable Secure Dial reception while in STE-210 Signaling. When the network is
set to ISDN the RECEIVE STE-210 SECURE DIAL menu (
) shows whether the feature is
ENABLED or DISABLED. The default setting is “ENABLED”. With this feature disabled at the local STE
(near end), any key presses (DIAL PAD KEYS or SPEED KEYS) at the distant (far end) STE during a
STE-210 secure voice call will send the corresponding DTMF tones from the distant STE.
PRECEDENCE KEYS are only accessible if stored in a SPEED DIAL KEY.
Figure 2-31. Receive STE-210 Secure Dial Display
1. To change the setting, press
CHANGE
to toggle between ENABLED or DISABLED.
2. If no change is required or after a new entry is made, pressing
SCROLL
returns the display to
3. Press
BACK
to return the display to the NETWORK SETTINGS menu (
INITIATE STE ON VOICE BEARER:
ENABLED
SCROLL
BACK
CHANGE
STE-210 RECEIVE SECURE DIAL
ENABLED
SCROLL
BACK
CHANGE
Содержание CEU
