manualshive.com logo in svg

L-3 Communications CEU, Руководство пользователя

"Бесплатное скачивание руководства пользователя для продуктов L-3 Communications CEU. Получите подробную информацию о вашем устройстве, включая инструкции по эксплуатации, здесь: manualshive.com. Скачивайте руководства прямо сейчас и ознакомьтесь с функциональностью вашего устройства."

Поделиться
Скачать
background image

STE User’s Manual 

8510 Capabilities 

Rel. 2.6

 

9-5

priority ring pattern back to the terminal upon a successful attempt.  This feature does not require a call 
appearance/feature button with a lighted LED. 
DEFINITY Auto Callback is assigned as a feature on a call appearance/feature button only. 
5ESS Repeat Call is a CLASS feature and must be assigned to the line on a subscription or per-use 
basis to function.  This feature may be assigned to a call appearance/feature button, but may also be 
accessed by means of feature access code. 

9-4.1.3 Auto-Hold 

Auto-Hold is a local hold feature allowing the STE user to press the HOLD button and place a data bearer 
call on hold.  Retrieving a call placed on auto-hold is a two-step process.  You must press the data bearer 
call appearance associated with the flashing data bearer call appearance indicator (in the lower left 
corner of the STE display) and then press the speakerphone button or lift the handset to go off-hook on 
the data bearer call appearance.  The auto-hold feature is different from the switch hold feature.  The 
switch hold feature is reserved for voice calls and does not work for data bearer calls. 

9-4.1.4 Bad 

Beep 

If you press a feature button rejected by the switch, the STE will provide a 600 Hz tone (a “bad beep”) to 
alert you that the switch has rejected that feature activation.  There are many reasons why this can occur.  
These range from a feature not being provisioned for the pressed feature button, to pressing a 
provisioned feature button at an inappropriate time. The “good beep” tone is at 738 Hz. 

9-4.1.5 Analog 

Bridged Call Appearance 

An Analog Bridged Call Appearance allows a STE-8510 user to have a call appearance of an analog 
voice terminal, such as a regular PSTN desk phone.  An Analog Bridged Call Appearance can be used to 
originate calls from and answer calls to a specific analog voice terminal as programmed by the switch 
administrator.  An Analog Bridged Call Appearance can also be used to bridge onto calls to or from a 
specific analog voice terminal as programmed by the switch administrator.  Bridged call alerting must be 
enabled at the switch for alerting at a station with bridged calls assigned. 
A bridged call appearance is considered the same as a normal call appearance when determining the 
value of the Last Call Appearance to be entered in the configuration menu.  This feature must be 
assigned to one of the first six call appearance/feature buttons with an LED. 

9-4.1.6  Digital Bridged Call Appearance 

A Digital Bridged Call Appearance allows a STE to share the call appearance of another single or multi-
appearance digital voice terminal user’s primary directory number. A Digital Bridged Call Appearance can 
be used to originate calls from and answer calls to a specific digital voice terminal button, as programmed 
by the switch administrator.  A Digital Bridged Call Appearance can also be used to bridge onto calls to or 
from a specific digital voice terminal button, as programmed by the switch administrator. 
For example, an assistant might have a bridged appearance of their supervisor’s extension.  The bridged 
appearance button functions exactly like the original call appearance; it indicates when the appearance is 
active or ringing.  The switch administrator must program which extension and which call appearance 
button you want to monitor at this phone.  A bridged call appearance is considered the same as a normal 
call appearance when determining the value of the Last Call Appearance to be entered in the 
configuration menu.   This feature must be assigned to one of the first six call appearance/feature buttons 
with an LED. 

9-4.1.7  Call Forward All 

You can access the Call Forward All feature using an assigned feature button.  When the Call Forward All 
Feature button is pressed (the associated LED will light), all new incoming calls to the primary directory 
number will be directed to the programmed forwarding destination.  The switch will send a special call 
forwarding alerting pattern to the forwarded terminal when this feature is enabled.  (See Paragraph

 

9-

4.1.1

 for information on alerting patterns.)  This applies to the Call Forward Busy Feature Button and the 

Call Forward No Answer Feature Button as well.  This feature must be assigned to a call 
appearance/feature button with an LED. 
For the DEFINITY, you will program the number on a per use basis. 

Содержание CEU

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CEU

Panasonic KX-TG1611 Operating Instructions Manual preview
KX-TG1611
Бренд: Panasonic Страницы: 32
Panasonic KX-PRD262 Quick Manual preview
KX-PRD262
Бренд: Panasonic Страницы: 10
Panasonic KX-TS520FX Operating Instructions preview
KX-TS520FX
Бренд: Panasonic Страницы: 2
Panasonic KX-TD500CE User Manual preview
KX-TD500CE
Бренд: Panasonic Страницы: 280
Panasonic KXTVS100 - VOICE MAIL SYSTEM Quick Installation Manual preview
KXTVS100 - VOICE MAIL SYSTEM
Бренд: Panasonic Страницы: 91
Panasonic KX-T336 Installation Instructions Manual preview
KX-T336
Бренд: Panasonic Страницы: 872
Panasonic Easa-Phone VA-208 Operating Instructions Manual preview
Easa-Phone VA-208
Бренд: Panasonic Страницы: 45
Panasonic Easa-Phone VA-208 Operating Instruction preview
Easa-Phone VA-208
Бренд: Panasonic Страницы: 45
Panasonic KX-TH102M Operating Instructions Manual preview
KX-TH102M
Бренд: Panasonic Страницы: 128
Panasonic KX-TD308 Installation Manual preview
KX-TD308
Бренд: Panasonic Страницы: 408
TDS Polycom VVX410 Administrator'S Manual preview
Polycom VVX410
Бренд: TDS Страницы: 8
TIE Ultracom DCX Feature Handbook preview
Ultracom DCX
Бренд: TIE Страницы: 28
VTech DS6751 Manual preview
DS6751
Бренд: VTech Страницы: 16
BT SYNERGY 4500 User Manual preview
SYNERGY 4500
Бренд: BT Страницы: 100
Toshiba Strata CTX Series Installation And Maintenance Manual preview
Strata CTX Series
Бренд: Toshiba Страницы: 40
Toshiba Strata CT Installation & Maintenance Manual preview
Strata CT
Бренд: Toshiba Страницы: 385
Toshiba Strata CTX 100-S Programming Manual preview
Strata CTX 100-S
Бренд: Toshiba Страницы: 592
Doro 760x Manual preview
760x
Бренд: Doro Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды