L-3 Communications CEU, Руководство пользователя

Страница: 144 / 312

User Functions STE User’s Manual
5-12 Rel. 2.6
Figure 5-24. Press Any Key Menu
Press: Result:
DONE Return display to INITIATE TERMINAL TEST / INITIATE FRONT PANEL TEST menu
(Paragraph
5-1.11 )
Press DONE to terminate the test.
5-2. VIEW TPA SETTINGS
Terminal Privileges are made by and can only be changed by the TPA but may be viewed by all users to
determine how their STE is configured. The procedures below allow viewing of the settings.
1. Access the TERMINAL CONFIGURATION CONTROL menu by pressing MENU , SELECT ,
SCROLL , and VIEW .
Figure 5-25. Terminal Configuration Control Menu
Press: Result:
SELECT Advances display to INITIAL SECURE MODE: menu ( Figure 5-26 )
SCROLL Advances display to SECURE ACCESS CONTROL SYSTEM menu ( Figure 5-29 )
BACK Returns display to TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE
UPDATE MANAGEMENT menu (
Figure 5-3 )
Press SELECT .
2. Initial Secure Mode.
The INITIAL SECURE MODE menu ( Figure 5-26 ) determines whether the STE will
automatically initiate a secure call upon completion of dialing. Three modes are available:
•
Traditional: The STE will proceed to a non-secure voice call, unless changed while placing
the call.
•
Auto-Secure: The STE will automatically initiate a secure voice call, unless changed while
placing the call. This is the default setting.
•
Secure-Only: The STE will always initiate a secure voice call and will not allow non-secure
communications.
NOTE
If the INITIAL SECURE MODE is set to “Secure-Only” and the STE is zeroized, it
will not reset to the default mode of “Auto-Secure” but will remain in the “Secure-
Only” mode.
Press Any Key
DONE
TERMINAL CONFIGURATION CONTROL
SELECT BACK SCROLL