manualshive.com logo in svg

L-3 Communications CEU, Руководство пользователя

"Бесплатное скачивание руководства пользователя для продуктов L-3 Communications CEU. Получите подробную информацию о вашем устройстве, включая инструкции по эксплуатации, здесь: manualshive.com. Скачивайте руководства прямо сейчас и ознакомьтесь с функциональностью вашего устройства."

Поделиться
Скачать
background image

STE User’s Manual 

Remote Control Operations 

Rel. 2.6

 

8-11

When used for initial dialing, upon receiving the ATDn command, the STE goes off-hook and dials “n” 
which can include any of the sixteen dial characters (0-9, #, *, and AUTOVON call precedence levels A, 
B, C, and D and the following modifiers: P, T, W, comma, period, and semi-colon.  If the terminal is off-
hook, it just sends the dial digits and/or modifiers.  Any unsupported character in the dial string is ignored.  
If in Japan PSTN mode, and the dialed number is blacklisted, the STE returns the result code 
45/BLACKLISTED; UNABLE TO PLACE CALL; TRY LATER.  The ATDn command causes the STE to 
enter the Connecting State and set bit 7 of register S17 to a 1 unless a semicolon is encountered in the 
dialing string (n). 
If the STE is in the command state with an active call, upon receiving the ATDn command, the STE dials 
“n” which can include any of the sixteen secure dial characters (0-9, #, *, and AUTOVON call precedence 
levels A, B, C, and D).  Any unsupported character in the secure dial string is ignored.  The ATDn 
command can contain up to a maximum of 32 valid characters.  If in a STU-III call, an error result code is 
returned if the far-end is not capable of accepting secure dial digits, otherwise an OK result code is 
returned.  For STE and SCIP calls, an OK result code is returned regardless. 
 

Table 8-5.  ATDn Command Codes - Dial Parameters 

Parameter Description 

A Dial 

Flash 

Override 

Upon receiving the “A” parameter after the “D” command, the STE dials with the 
precedence code “flash override”.  This command is for use with a network that 
supports MLPP. 

B 

Dial Flash 

Upon receiving the “B” parameters after the “D” command, the STE dials with 
the precedence code “flash”.  This command is for use with a network that 
supports MLPP. 

C Dial 

Immediate 

Upon receiving the “C” parameters after the “D” command, the STE dials with 
the precedence code “immediate”.  This command is for use with a network that 
supports MLPP. 

D 

Dial Priority 

Upon receiving the “D” parameters after the “D” command, the STE dials with 
the precedence code “priority”.  This command is for use with a network that 
supports MLPP. 

P 

Pulse Dialing  Upon receiving the “P” parameter anytime after the “D” command, the STE 

changes to pulse dialing. 

T 

Tone Dialing 

Upon receiving the “T” parameter anytime after the “D” command, the STE 
changes to tone dialing. 

W 

Wait for Dial 
tone 

For PSTN: 
If the W is in the dialing string before a dialing character (0-9, #, *, A, B, C, D) 
then the X setting defined in S22 will be ignored and the value in S7 will be 
used as the timeout value for dial tone detection.  If dial tone is detected before 
the timer expires, processing of the dial string will continue.  If dial tone has not 
been detected when the timer expires, the call is terminated.   
If a dialing character (0-9, #, *, A, B, C, D) is detected in the dialing string before 
a W is detected, then dial tone detection is set based on the X setting in S22 as 
follows: 
If X is set to 0, 1, or 3, then dial tone detection is disabled.  A timer based upon 
the value in S6 is set prior to dialing.  When the timer expires, processing of the 
dial string continues. 
If X is set to 2 or 4, then dial tone detection is enabled and the value in S7 is 
used as the timeout value for dial tone detection.  If dial tone is detected before 
the timer expires, processing of the dial string continues.  If dial tone has not 
been detected when the timer expires, the call is terminated. 
For ISDN, TRI-TAC, and BDI: 
Dial tone detection is always disabled for these switch types.  If a W is 
encountered in the dial string, it is ignored.  There is a fixed delay for these 
switch types as follows: 

Содержание CEU

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CEU

NEC Aspire Administrator'S Manual preview
Aspire
Бренд: NEC Страницы: 7
NEC Aspire Quick Reference preview
Aspire
Бренд: NEC Страницы: 2
NEC Aspire Quick User Manual preview
Aspire
Бренд: NEC Страницы: 3
Panasonic KX-TGP500 Quick Start Manual preview
KX-TGP500
Бренд: Panasonic Страницы: 30
Panasonic KX-TG6511 Operating Instructions Manual preview
KX-TG6511
Бренд: Panasonic Страницы: 18
Jabra SP5050 - Bluetooth hands-free Speakerphone User Manual preview
SP5050 - Bluetooth hands-free Speakerphone
Бренд: Jabra Страницы: 221
Jabra CRUISER Quick Start Manual preview
CRUISER
Бренд: Jabra Страницы: 22
Jabra Speak 750 Get Started preview
Speak 750
Бренд: Jabra Страницы: 42
Yealink T5W Series Quick Reference preview
T5W Series
Бренд: Yealink Страницы: 4
Fortinet FortiFone FON-570 User Manual preview
FortiFone FON-570
Бренд: Fortinet Страницы: 24
Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Owner'S Manual preview
900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting...
Бренд: Radio Shack Страницы: 24
BT 4000 Classic Quick Setup And User Manual preview
4000 Classic
Бренд: BT Страницы: 64
Siemens OpenStage 40 G SIP Operating Manual preview
OpenStage 40 G SIP
Бренд: Siemens Страницы: 144
Siemens OpenStage 40 G SIP User Manual preview
OpenStage 40 G SIP
Бренд: Siemens Страницы: 220
Siemens OpenStage 60 G User Manual preview
OpenStage 60 G
Бренд: Siemens Страницы: 297
Sony XPERIA PRO-1 Startup Manual preview
XPERIA PRO-1
Бренд: Sony Страницы: 2
Sony TL-HP90 Service Manual preview
TL-HP90
Бренд: Sony Страницы: 18
Sony IT-M602 - Telephone With Speaker Phone Operating Instructions Manual preview
IT-M602 - Telephone With Speaker Phone
Бренд: Sony Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды